The emergence of the automatic locking screw machine has improved the locking efficiency of the screw, especially the air blowing automatic locking screw machine is very efficient, so what should we pay attention to when using the air blowing automatic locking screw machine, is it the most convenient? A reliable solution, let's take a look at the precautions for the use of the air blowing automatic locking screw machine
How should we extend the life of the automatic locking screw machine after we purchase it? The following briefly teaches us some cleaning and maintenance methods. Any machinery and equipment needs to be cleaned and maintained regularly. If the time is long, the machinery and equipment are very easy to break, and at the same time, the service life will be greatly shortened. Therefore, the use of automatic locks When the screw machine is used, it also needs to be cleaned and maintained regularly. The detailed operation method is as follows: If you do not use it for a long time, please turn off the power. Periodically energize and ventilate to check performance. Periodically clean the outer surface of the case of the automatic locking screw machine. If it is not used for a long time, use an oily cloth to scrub as much as possible, and try to use as little water as possible. Periodically clean the screw track to ensure that the screw runs smoothly within the track. Periodically clean the screw silo, usually blowing out the residue in the silo with high pressure air. Periodically clean the feeding system to ensure a smooth feeding system. It is recommended to add some grease to the moving part. Adhere to the active lock screw machine ventilation, dry. Always check, if you have any questions about use or need maintenance, please contact the manufacturer in time, and do not disassemble and assemble by yourself.
Two simple negligent questions about automatic locking screw machine
1. In terms of design and principle, the automatic locking screw machine itself has no major defects, but many times we will ignore a question, that is, the quality of the screw! Compared with foreign countries, domestic screw manufacturers produce more defective screws. For example, large heads, flat heads, and fronts are the killers of automatic locking screw machines. It is fatal to automatic locking screw machines. Therefore, when selecting screws It is also a question worthy of our careful consideration.
2. First of all, we must understand the factors of locking screws slipping teeth, the main ones are the jamming machine, slipping teeth (not tight), and flower heads, which are all caused by the poor quality of the screws. Or it is caused by the manufacturer changing the planned size in order to deal with the poor quality of the screw. For most screw machine manufacturers, it cannot be handled, and it is a fatal disease! ! ! The other is the question of the machine itself, such as the question caused by the materials used, technology and the brand used by the electronic parts, but these are not big questions, because powerful manufacturers can handle this question. The jamming machine is caused by the defective screw, and the so-called slippery teeth and flower heads are formed by two factors. The first is the question of its own planning and structure, and the second is that the screw machine manufacturer enlarges all screw machine channels in order to deal with the above-mentioned special-shaped screws, including the nozzle of the electric batch. reason!
1. The screws used should have fewer foreign objects, mixed materials, and the number one defect, otherwise the machine will not work smoothly.
2. The selected screws should be commonly used, a large number, and a small variety to improve the use efficiency of the automatic screw machine.
3. It should be insisted that the electric batch lock mouth slides smoothly on the electric batch sliding sleeve, otherwise the screw will not easily enter the electric batch lock mouth, which will affect the use of the automatic locking screw machine.
4. The position of the locking screw should be as consistent as possible to avoid different positions, uneven appearance, and small space.
5. Do not bend the screw conveying pipe, otherwise the screw will be stuck at the bend during the screw conveying process.
6. It is necessary to wait for the torque of the electric batch to reach the set torque, and the electric batch automatically stops before lifting the electric batch.
7. If you find that the automatic locking screw machine does not send a screw to the electric batch lock mouth to be locked, you can repeat it (press down the screwdriver and the electric batch roll), and let the machine send a screw to the electric batch lock mouth to be locked.
8. The air pressure should not be adjusted too high, otherwise it will only speed up the wear of the nozzle of the electric batch, and the screw will sometimes directly rush out of the lock nozzle.
9. The vibration force of the track should not be adjusted too much, otherwise the screw will easily squeeze out the track on the screw track, which will affect the stability of the active locking screw machine.
